crackinitiation相关论文
Quantifying the Influences of Carbides and Porosities on the Fatigue Crack Evolution of a Ni-Based S
The detrimental effects of carbides and porosity on the fatigue crack initiation and propagation of nickel-based single-......
In this work,bending fatigue behavior of thinner Zr61Ti2Cu25Al12 (ZT1) BMG beams with thicknesses of 500 μm and 100 μm......
...
The fatigue behavior of 30WGP1600 non-oriented electrical steel, which is generally used in the motors for electrical ve......
THEORETICAL ANALYSIS AND SIMULATION STUDY OF THE UPPER BOUND OF TOOL EDGE RADIUS IN NANOSCALE DUCTIL
In cutting of brittle materials,experimentally it was observed that there is an upper bond of tool cutting edge radius,b......
On the unified view of the contribution of plastic strain to cyclic crack initiation:impact of the p
This paper deals with the assessment of the local conditions that control the nucleation of cracks around slip bands.Thu......
Study on High-cycle Shear Fatigue Behavior of Two Kinds of Spot Welded 980MPa Ultra High Strength St
DP980 and QP980 steels are chosen to evaluate their properties of welded spot under high-cycle shear fatigue test.Sa......
Al alloys have been widely used as engineering materials in many machinesand structures because of their excellent prope......
A Nano-Cantilever Method for Crack Initiation at the Free Edge of the Cu/Si Interface in Nanoscale C
Straight and Bent nano-cantilever specimens are respectively proposed to investigate the single-mode and mixed-mode crac......
为阐明Ti/Al/Mg/Al/Ti层合板的变形行为及断裂形式,对轧制态和退火态的层合板进行原位弯曲和拉伸试验,研究组元板和金属间化合物的......
